Product Description
The Brass Elbow FxF 10mm is a fitting used to connect two pieces of pipe or tubing at a 90-degree angle. It's commonly used in plumbing, gas, and other fluid systems for creating directional changes in the pipe layout.
Key Features of the Brass Elbow FxF 10mm:
-
Material: Brass:
- Made from brass, this elbow fitting is corrosion-resistant, durable, and able to withstand high-pressure conditions. Brass is ideal for both hot and cold water systems as well as gas lines, offering longevity and excellent resistance to wear and tear.
-
Design:
- The 90-degree angle allows you to change the direction of the pipe layout easily.
- The FxF designation indicates that both ends of the fitting have female threads (F), meaning you’ll need to connect this fitting to male-threaded pipe or other fittings with male threads.
-
Size: 10mm:
- The fitting is designed for use with 10mm diameter pipes, which is a common size in residential and commercial plumbing systems. The 10mm size is suitable for both water and gas systems, depending on the application.
-
Applications:
- Plumbing: Often used in water systems, such as hot and cold water connections, irrigation, and more.
- Gas Systems: Suitable for LPG and natural gas lines in certain applications.
- HVAC: Can be used in heating, ventilation, and air conditioning systems where piping needs to change direction.
-
Durability:
- Brass is known for its high tensile strength and resistance to rust or corrosion. It makes the fitting long-lasting and reliable under a variety of environmental conditions.
Installation:
-
Turn Off Water or Gas Supply:
- Before installation, ensure the water supply or gas supply is turned off to avoid any accidents or leaks.
-
Thread Sealing:
- Use PTFE thread sealant tape or pipe joint compound on the male threads before screwing the elbow fitting into place to prevent leaks. This is especially important in gas systems.
-
Tightening:
- Hand-tighten the elbow fitting into place, and then use a pipe wrench to tighten it securely. Be cautious not to overtighten, as this could damage the threads or the fitting.
-
Leak Test:
- After installation, check the connections for leaks. For water systems, you can use a soapy water solution to check for leaks, and for gas systems, a leak detection fluid should be used. If leaks are found, turn off the supply, tighten the connections, and recheck.
Conclusion:
The Brass Elbow FxF 10mm is a versatile and durable fitting used for changing the direction of 10mm pipes in plumbing, gas, and HVAC systems. With its high resistance to corrosion and wear, it's a reliable choice for both residential and commercial installations. Proper installation and regular inspection will ensure long-lasting, leak-free performance.