Product Description
The Braemar Wall Furnace Heaters In-Fit Panel Kit is designed to be a complementary accessory for Braemar wall furnace heaters. This kit helps to finish the installation of the heater by covering gaps between the heater unit and the wall, ensuring a neat and professional installation. It provides a clean, streamlined look while also offering practical benefits such as safety and ease of maintenance.
Key Features of the Braemar Wall Furnace Heaters In-Fit Panel Kit:
-
Aesthetic Finish:
- The In-Fit Panel Kit is designed to conceal the space around the wall furnace unit, giving the installation a clean, integrated look. This is especially useful if the heater is installed in an area where aesthetic considerations are important.
-
Safety:
- The kit ensures that there are no gaps or spaces around the installed heater, which could lead to heat loss or pose a potential safety hazard. It helps to direct the heat into the room efficiently and prevents accidental contact with hot surfaces.
-
Durable Construction:
- The panels are typically made from high-quality materials that are durable and designed to withstand the heat produced by the wall furnace heater. The materials are also chosen to match the heater’s design for a seamless fit.
-
Easy Installation:
- The In-Fit Panel Kit is designed for easy installation and is typically a DIY-friendly upgrade to the basic installation. It’s usually a pre-fabricated set of panels that can be easily attached to the heater using screws, clips, or other fasteners provided in the kit.
-
Compatibility:
- The Braemar In-Fit Panel Kit is made specifically for Braemar wall furnace heaters, ensuring a perfect fit and compatibility. This helps in achieving a secure and professional-looking installation that functions as intended.
-
Neat Appearance:
- Once installed, the In-Fit Panel Kit ensures that any wiring or fittings are hidden from view, contributing to a more neat and organized appearance of the heater and surrounding area.
Installation of the Braemar Wall Furnace Heaters In-Fit Panel Kit:
-
Turn Off Power and Gas:
- Before you start the installation process, make sure that the gas supply and electricity are turned off to avoid any accidents or safety hazards during installation.
-
Remove the Heater Cover (if needed):
- If there is an existing cover or frame that needs to be removed for the panel installation, take this off carefully according to the manufacturer’s instructions.
-
Position the Panels:
- Carefully place the In-Fit panels around the heater, ensuring that they align properly with the unit and the surrounding wall. The panels are designed to fit snugly against the heater, so make sure the edges are lined up correctly.
-
Secure the Panels:
- Use the provided screws or clips to secure the panels to the heater. Depending on the kit design, this may involve attaching the panels to mounting points on the heater or the surrounding wall.
-
Check for Proper Fit:
- Once the panels are in place, double-check that everything is securely fastened and that the panels are aligned properly. There should be no gaps or movement once the panels are installed.
-
Test the Heater:
- After installation is complete, turn the gas supply and power back on. Test the heater to ensure that it’s functioning correctly and that the In-Fit panels do not interfere with airflow or heating performance.
Troubleshooting:
-
Panel Misalignment:
- If the panels are not fitting properly, check for any obstructions around the installation area that might be preventing the panels from aligning. Make sure the wall is level and there are no issues with the heater’s position.
-
Difficulty Securing Panels:
- If you’re having trouble securing the panels, ensure that the screws or clips are aligned with the mounting holes. Check that the fasteners provided in the kit are the correct ones for your model of heater.
-
Overheating:
- If you suspect the heater is overheating or that airflow is restricted due to the panels, make sure the panels are not blocking any ventilation or airflow paths of the heater. The kit is designed to leave space for airflow but verify everything is correctly installed.
Conclusion:
The Braemar Wall Furnace Heaters In-Fit Panel Kit is a practical accessory for Braemar wall furnace heaters, designed to improve aesthetics, enhance safety, and provide a neat finish to the installation. It is easy to install, durable, and ensures that the heater operates efficiently while maintaining a tidy appearance. If you are installing a Braemar wall furnace heater, using the In-Fit Panel Kit will help you achieve a polished, professional installation.
