Free
Shipping
Brass Chrome Plated Female Tee 15mm BSP Watermarked PN AW405 is a plumbing fitting designed for use in water systems, typically in residential, commercial, or industrial applications. Below is a breakdown of the key features and specifications of this fitting:
Brass Material:
The fitting is made of brass, a durable and corrosion-resistant material commonly used in plumbing systems. Brass is preferred for its strength, resistance to rust, and long-lasting performance, particularly in water and gas systems.
Chrome Plated:
The chrome plating provides a shiny, aesthetically pleasing finish while offering additional protection against corrosion. It also helps to make the fitting easier to clean and maintain, as the chrome finish resists tarnishing and staining.
Female Tee:
The term "Female Tee" indicates that the fitting has female threads on all three openings (one central port and two side ports). This type of fitting is used to join three pipes or hoses together, with the central port being connected to one pipe, and the two side ports to two other pipes.
The female threads are designed to connect with male-threaded fittings, such as pipes or adapters.
15mm BSP (British Standard Pipe):
The fitting has 15mm BSP threads. BSP (British Standard Pipe) is a widely used thread system in plumbing, particularly in the UK and other countries that follow the British standard. 15mm is the nominal size of the pipe that fits into the fitting, typically referring to the outside diameter of the pipe.
BSP threads come in two types: BSPP (Parallel) and BSPT (Tapered). Most plumbing applications use BSPP, which creates a parallel seal.
Watermarked:
The Watermark is an Australian standard for plumbing products, indicating that the fitting has been tested and complies with the relevant plumbing and water standards. A Watermark-approved fitting ensures it meets the minimum standards for safety, reliability, and suitability in water systems. It guarantees that the fitting is safe for use in potable (drinking) water systems.
PN AW405:
PN stands for Pressure Nominal, which indicates the maximum pressure the fitting can withstand. AW405 is a specific product code or series for this fitting, which could be relevant for its specification or usage. The PN value typically indicates the pressure rating of the fitting in bar, but you should consult the product's technical datasheet for exact pressure ratings.
Plumbing Systems: This fitting is often used in water supply systems for residential, commercial, or industrial plumbing. The 15mm BSP female tee is ideal for situations where you need to split or join water lines, such as in distribution systems, connecting appliances, or creating branches in pipe systems.
Water Distribution: Commonly used in piping systems that need to branch off in three directions, such as in sink connections, bathtubs, or water filtration systems.
Maintenance and Repairs: The brass material and chrome finish make it suitable for both new installations and pipe repairs where connections need to be adjusted or redirected.
Compatibility:
Ensure the fitting is compatible with other 15mm BSP male-threaded fittings. BSP threads are widely used, but confirm whether your pipes are BSPP (parallel) or BSPT (tapered), as they require different sealing techniques.
Proper Sealing:
When installing, use appropriate sealant (such as PTFE tape or thread sealant) to ensure that the connection is leak-proof. The use of sealant is especially important in water systems to prevent leakage.
Torque:
Tighten the fitting by hand and then use a wrench to finish tightening, but avoid over-tightening, as it could damage the threads. Brass fittings are durable, but they can be stripped or cracked if overtightened.
Pressure Considerations:
Check the pressure rating of the fitting and ensure that your water system does not exceed the maximum pressure capacity specified. The PN value usually refers to the maximum allowable pressure, but confirming the pressure rating is crucial to avoid damage to the fitting or leaks.
Inspection:
After installation, inspect the connection for any signs of leakage. Test the system under pressure to confirm that all connections are secure and watertight.
Corrosion Resistance: The chrome-plated surface will help protect the fitting from corrosion, but regular inspection of the fitting and surrounding plumbing is always recommended, especially in environments with high water hardness or chemical exposure.
Check for Leaks: After installation, always check for leaks by turning on the water supply and inspecting all connections. If any leaks are found, turn off the water, and inspect and tighten the connections.
Maintenance: The chrome plating helps keep the fitting looking good over time, but it’s still important to maintain the plumbing system by checking for signs of wear, corrosion, or leaks regularly.
SKU | 19887 |
Brand | Steer |
$25.00