BRIVIS ELECTRONIC BOARD CONTROL N-E6 (NO SWITCH)

Description
Specifications

Product Description

It seems there might be some confusion regarding the BRIVIS Electronic Control Board N-E6 (No Switch) - Part# B021191. This part is specifically designed for Brivis ducted cooler systems, not for evaporative coolers. If you're looking for a control board for a Brivis evaporative cooler, you'll need to identify the correct part number and model specific to the cooler.

For Brivis Evaporative Coolers:

Brivis evaporative coolers typically use different control boards or components, such as:

Cooler control panels
Solenoid valves
Pump controllers
Thermostats

If you need a control board for a Brivis evaporative cooler, follow these steps:

Identify the Cooler Model:
- Check the model number of your Brivis evaporative cooler (usually found on a label or plate on the unit).
- Refer to the user manual for part numbers and compatibility.
Common Symptoms of a Faulty Cooler Control Board:
- Cooler not turning on or responding to controls.
- Fan not operating or running continuously.
- Water pump not functioning.
- Error codes or blinking lights on the control panel.
Replacement:
- Turn off the power supply to the cooler.
- Locate the control board (usually inside the cooler unit).
- Take a photo or note the wiring connections.
- Disconnect the old board and install the new one, ensuring proper wiring.
- Restore power and test the system.
  - Ensure you purchase the correct part number for your cooler model.
Professional Assistance:
- If you're unsure about replacing the control board, contact a licensed HVAC technician or Brivis service provider.

For the BRIVIS N-E6 Control Board (Part# B021191):

If you specifically need the N-E6 control board (Part# B021191) for a Brivis ducted gas heater, ensure it is compatible with your system. This part is not intended for evaporative coolers.

For further assistance, consult the Brivis user manual or contact Brivis customer support.

Specifications