Free
Shipping
The Brivis Evaporative Cooler Barbed ELBI Solenoid is a key component used in Brivis evaporative cooling systems. This solenoid valve, rated at 5.5 liters per minute (L/min) and 240 volts, controls the flow of water into the cooler's distribution system. It ensures proper water supply for the cooling pads, which is essential for efficient operation. If the solenoid fails, it can lead to issues such as insufficient cooling, water leakage, or the cooler not functioning at all.
Flow Rate: 5.5 L/min.
Voltage: 240V.
Barbed Connections: Designed for easy installation with hose connections.
Compatibility: Suitable for Brivis evaporative coolers and other systems using similar specifications.
No water flow into the cooler.
Continuous water flow even when the cooler is off.
Leaking water from the unit.
Cooler not cooling effectively.
Turn off the power and water supply to the cooler.
Locate the solenoid valve, typically near the water inlet or inside the unit.
Disconnect the wiring and water lines from the solenoid.
Remove the old solenoid and replace it with the new ELBI solenoid.
Reconnect the wiring and water lines, ensuring no leaks.
Restore power and water supply, then test the cooler.
Regularly inspect the solenoid for leaks or blockages.
Clean the water filter to prevent debris from affecting the solenoid's operation.
Ensure the water pressure is within the recommended range for your cooler.
If you're unsure about replacing the solenoid yourself, consult the Brivis user manual or contact a licensed HVAC technician for assistance.
For further assistance, contact Brivis customer support or consult with a qualified technician.
SKU | 16121 |
Brand | Brivis |
Shipping Weight | 0.5000kg |