Free
Shipping
The Genuine Brivis Gas Heater Igniter Flame Sensor (Part # B024831) is a critical component designed for Brivis gas heaters. This flame sensor, also known as a CSX Spade type sensor, plays a vital role in ensuring the safe and efficient operation of the heater by detecting the presence of a flame. If the flame sensor does not detect a flame, it will shut off the gas supply to prevent gas leaks and potential hazards.
Part Number: B024831
Type: Flame sensor (CSX Spade type)
Function: Detects the presence of a flame to ensure safe operation of the gas heater.
Compatibility: Designed specifically for Brivis gas heating systems.
Safety: Prevents gas leaks by shutting off the gas supply if no flame is detected.
Material: Made from durable materials to withstand high temperatures and repeated use.
Used in Brivis ducted gas heaters and other Brivis heating systems to ensure safe ignition and operation.
Turn Off Power and Gas Supply: Ensure the heater is turned off and disconnected from the power supply. Shut off the gas supply to the unit.
Locate the Old Flame Sensor: Identify the existing flame sensor in the heater assembly.
Disconnect Wiring: Carefully disconnect the wires connected to the old flame sensor.
Remove the Old Sensor: Unscrew or detach the old flame sensor from its mounting position.
Install the New Flame Sensor: Position the new B024831 flame sensor in place and secure it.
Reconnect Wiring: Attach the wires to the new flame sensor, ensuring proper connections.
Restore Power and Gas Supply: Turn the gas supply and power back on.
Test the System: Turn on the heater and ensure the new flame sensor is functioning correctly.
Sensor Failure: If the flame sensor fails, the heater may not ignite or may shut off unexpectedly.
Dirt or Debris: Accumulation of dirt or debris on the sensor can prevent it from detecting the flame properly.
Electrical Issues: Faulty wiring or incorrect voltage can prevent the flame sensor from operating properly.
Regularly inspect the flame sensor for signs of wear, dirt, or damage.
Clean the flame sensor and surrounding components during routine maintenance to ensure proper operation.
Replace the flame sensor if it shows signs of failure or reduced performance.
Always follow the manufacturer's instructions and safety guidelines when working with gas appliances.
If you're unsure about replacing the flame sensor, consult a licensed technician or Brivis customer support.
For genuine parts and further assistance, contact Brivis customer service or an authorized dealer. If you need the specific installation manual for your Brivis model, refer to the product documentation or the Brivis website.
The B024831 flame sensor is a reliable and essential component for Brivis heaters. Always verify the part number with your heater's user manual or Brivis support to ensure compatibility.
If the part is no longer available, consult Brivis for an updated or equivalent replacement.
By maintaining and replacing the flame sensor as needed, you can ensure your Brivis heater operates safely and efficiently, providing reliable warmth for your home.
Genuine Brivis Gas Heater Fan & Limit Control Switch , Auto Reset 11″ inch Honeywell
The Genuine Brivis Gas Heater Fan & Limit Control Switch (Auto Reset, 11-inch, Honeywell) is a critical safety and control component for Brivis gas heaters. This switch serves two primary functions: it controls the operation of the heater's fan and acts as a safety limit switch to prevent overheating. The auto-reset feature allows the switch to automatically reset once the temperature returns to a safe range.
Type: Fan & Limit Control Switch (Auto Reset)
Length: 11-inch capillary tube
Function:
Fan Control: Regulates when the heater's fan turns on and off based on temperature.
Limit Control: Acts as a safety device to shut off the heater if the temperature exceeds a safe limit.
Auto Reset: Automatically resets once the temperature returns to a safe range.
Compatibility: Designed for Brivis gas heaters and manufactured by Honeywell, a trusted brand in heating components.
Safety: Prevents overheating and ensures proper fan operation for efficient heating.
Used in Brivis ducted gas heaters to regulate fan operation and provide overheat protection.
Turn Off Power and Gas Supply: Ensure the heater is turned off and disconnected from the power supply. Shut off the gas supply to the unit.
Locate the Old Control Switch: Identify the existing fan and limit control switch in the heater assembly.
Disconnect Wiring and Capillary Tube: Carefully disconnect the wires and the capillary tube connected to the old switch.
Remove the Old Switch: Unscrew or detach the old control switch from its mounting position.
Install the New Control Switch: Position the new 11-inch Honeywell fan and limit control switch in place and secure it.
Reconnect Wiring and Capillary Tube: Attach the wires and capillary tube to the new switch, ensuring proper connections.
Restore Power and Gas Supply: Turn the gas supply and power back on.
Test the System: Turn on the heater and ensure the new control switch is functioning correctly.
Switch Failure: If the switch fails, the fan may not operate correctly, or the heater may overheat.
Incorrect Fan Operation: A faulty switch may cause the fan to turn on too early, too late, or not at all.
Overheating: If the limit control function fails, the heater may not shut off during overheating, posing a safety risk.
Regularly inspect the control switch and capillary tube for signs of wear or damage.
Ensure the capillary tube is properly positioned and not bent or kinked.
Replace the control switch if it shows signs of failure or reduced performance.
Always follow the manufacturer's instructions and safety guidelines when working with gas appliances.
SKU | 16168 |
Brand | Honeywell |
Shipping Weight | 0.5000kg |
Shipping Width | 10.000m |
Shipping Height | 5.000m |
Shipping Length | 10.000m |
Shipping Cubic | 500.000000000m3 |